Five product families, seven core products and custom constructions for plant-specific voltage, conductor, screen and sheath requirements. Everything on this site serves renewable power generation.
Solar PV, wind turbine, energy storage, MV collection and special energy cable. Each family page includes construction data, applications and the products in that range.
PV1-F and H1Z2Z2-K DC cable for module, string and inverter wiring at up to 1500 V DC.
View range
Torsion-resistant power and control cable for nacelle, tower and pitch systems.
View range
Flexible, LSZH battery connection cable for cells, racks, PCS and BMS wiring.
View range
6–35 kV XLPE collector cable for solar farm and wind farm internal networks.
View range
Tracking, monitoring and grounding cable for the moving and protective parts of a plant.
View rangeEach product page includes a technical table, construction options, applications and a direct quotation form.
View allSingle-core PV DC cable with XLPE insulation and cross-linked sheath for module-to-inverter wiring.
Technical details →Multi-core power and control cable built for repeated twisting in nacelle and tower runs.
Technical details →Fine-strand tinned copper cable for cell, rack and PCS connections in BESS containers.
Technical details →Three-core XLPE collector cable with copper screen and armour for buried plant networks.
Technical details →High-flex DC cable for single-axis trackers, with a sheath that survives UV and abrasion.
Technical details →
Screened pair and triad cable for BMS, EMS and RS-485 communication in storage plants.
Technical details →
Flexible tinned copper earthing conductor for array frames, tracker piles and inverter bonding.
Technical details →Cable for a renewable project is usually a scheduled supply, not a stock item. The sequence below is what we agree with the contractor before the first drum is built.
Conductor, insulation, screen, armour, sheath and marking are fixed on an order drawing. Nothing is released to production until the contractor confirms it.
Stranding, insulation, cabling, armouring and sheathing run in sequence on in-house lines, so a partial delivery can be planned around the site programme.
Routine tests are run on the finished length, the report is matched to the drum number, and the reel is packed for export.
Drum layout, container loading and shipping documents are issued before the container leaves the factory.
Cross-sections outside the standard range, mixed power and control cores, tinned or bare copper, LSZH or PUR sheaths, steel tape or steel wire armour and customer core identification are all available. Share the plant design and we will confirm the construction.
Share the system voltage, conductor size, cable length, installation route, sheath or armour requirement and delivery destination. Our engineering team will reply within one business day.